Eagle Klaw 2.0 Floor Mat Clips for Car Mats and Liners - Made in USA

The world's only multi-point tension retainer, Eagle Klaw, grips your car floor with the strength of an eagle's claw. There is no need to drill or cut the floor, as it only takes about 3 minutes to secure your car mat. To install, simply step on it!

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. If your mat doesn't have holes, you can use the optional 3/8" Cutter. The five-legged design provides optimal force distribution and ensures that all spikes are inserted at the same time. The fastener won't move even if you push the mat hard in any direction.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet. Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a breeze, but it's important to read the instructions carefully before you begin. Ensure the car floor has sufficient padding or space under the carpet at the place of Eagle Klaw anchor installation before making holes in the mats. Put the cap through the hole, push the sliding washer up onto the cap post, and screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor. Place the car mat where you want it to stay, and pre-engage the spikes by pushing the fastener down or tapping on the cap with a hammer slightly to prevent rebound. You can also make small holes in the floor using an awl.

To ensure vertical movement so the spikes can pierce the floor, stomp down on the cap or use a hammer. Two common installation mistakes that cause negative reviews are: 1) Don't tighten the cap into the anchor before you stomp on the cap to install the fastener, as the spikes will break if the cap post sticks out under the anchor, and 2) Don't just engage the spikes with the carpet, as they may come loose or break and the mat will move again. Instead, make sure that all prongs fully penetrate the floor.

RE-DESIGNED and IMPROVED Eagle Klaw 2.0 is tough as a nail, with a patented, multi-point tension-mounted, minimally intrusive design. It's the most secure and easiest way to keep car floor mats in place. Kits include 2 fasteners per mat and an optional hole cutter. You can fasten your car mat in 3 minutes, and it works in all cars that have flooring with sufficient padding or space under it. Follow the installation instructions, drive safely, and keep your car floor nice and clean. Made in the USA.

product information: